Pay attention to the following when using the spot welding machine: 1. Whether the air pressure is above 1kgf/cm2; 2. Bad pressure reducing valve; 3. Leakage of O-ring, replace O-ring; 4. Oil is l...

1 spot welding machine can weld multiple welding points at the same time in one welding cycle, which not only has high productivity, but also has no diversion effect. Therefore, solder joints can be a...

In the process, the automatic shear butt welding machine is used, and different products need to be configured according to different products. 1, Welding of workpieces with a length of more than 2000...

Use inspection of flash butt welding machine: 1. Before using the flash butt welding machine, check that the rated voltage is consistent with the power supply voltage winding (380 v or 380 v), and ch...

There are (more than) a few strategies to join metals by welding. Every one of these procedures converts vitality to warm in the weld zone that brings about dissolving, combination, and joining. ...

The butt welding machine is very useful between steel bars and steel bars, and can be welded seamlessly or according to customer needs. It is widely used in manufacturing industries such as wheel rims...

1. Scope of application of cold welding repair machine of butt welding machine: cold welding repair machine is a professional precision repair of small defects such as pinholes, trachoma, air holes, c...

When the flash Butt fusion welding machines is welding, sometimes the workpiece does not carry out the end face geometry, the processing of the blank end and the surface cleaning will affect the produ...

The welding cycle of the continuous flash butt welding machine is composed of flashing, upsetting, holding and stopping procedures. The two consecutive stages of flashing and forging constitute a cont...